SLOPE INDICATOR - DIGITILT 09 INDICATOR

Application

The Digitilt 09 Indicator is a simple inclinometer readout. It offers the same resolution as the DataMate, but does not have the automatic depth prompts and recording capabilities of the DataMate.

1. At the office, prepare a field data sheet. It should list the starting depth for the survey and provide 5 columns for data: depths, A0 reading, A180 reading, B0 reading, and B180 reading.

2. At the site, connect control cable to the probe and the indicator. Then switch the indicator on. Insert the probe with wheels in the A0 direction. Lower the probe to the bottom of the casing installation. Wait 10-minutes while the probe adjusts to the temperature in the casing. Then begin the survey.

3. Raise the probe to the starting depth. Write down the A0 reading, then use the toggle switch to view the B0 reading. Write down the B0 reading, then raise the probe to the next depth and write down both readings. Continue until you reach the top of the casing.

4. Withdraw the probe from the casing, rotate it 180 degrees, and lower it to the bottom of the casing. Now you will obtain the A180 and B180 readings.

5. Raise the probe to the starting depth. Write down the A180 reading, and toggle to the B180 reading and write it down. Raise the probe to the next depth, and write down both readings. Continue until you reach the top of the casing.

6. When you return to the office, enter readings from the field data sheet into your computer. We recommend that you enter the readings into DMM for Windows. DMM's automatic checksum calculations will help you detect transcription errors. Then you can process the data in either DMM or DigiPro.

Easy to Read: The large character display helps eliminate errors.

Lower Cost: The Digitilt 09 is about two-thirds the price of the Digitilt DataMate.

High Resolution: The Digitilt 09 offers the same resolution as the Digitilt DataMate.