Application
Ring Anchor is anchored into concrete wall or ceiling for suspending ceiling and other items. It can be also be used as tape extensometer reference points installed at measurement stations along the tunnel or structure.
Advantages
- Quick and easy setting
- Automatic follow-up expansion
- Fire resistance
| Specification |  |
|||||
|---|---|---|---|---|---|---|
| Model No. | Material | Hole Diameter, do(mm) | Hole Depth, hl(mm) | Stand-off from surface to centre-line(mm) | Shank diameter, (mm) | Package Contents |
| CEP2-5 | Steel galvanized to 5 microns | 8 | 50 | 12 - 15 | 5 | 100 |
Basic Loading Data (For a Single Anchor)
All data on this page applies to
- Concrete: Fcc >/= 20N/mm2
- Table values are only for tensile loading
- No edge distance and spacing influence
Recommended load, Lrec (kN):
Tensile, NRec = 0.8 KN
| Setting Details | |
|---|---|
| Min. hole depth, h1 | 50 |
| Min. anchorage depth, hnom (mm) | 40 |
| Hole diameter, d0 (mm) | 8 |
| Distance to wall/ceiling, F (mm) | 12-15 |
| Anchor length, 1 (mm) | 66 |
| Bolt Diameter, d (mm) | 5 |
