Application
The Digitilt DataMate II records data from Digitilt inclinometer probes, tiltmeters, and spiral sensors. It can store up to 320 surveys and operate 16 hours on freshly charged batteries.
The DataMate is designed for hard use in difficult environments. Electronic components are rated for extended temperatures. Connector sockets are located on the face panel, away from contact with mud, water, or snow. The case is sealed against condensation and humidity, and the bright, backlit display is visible under all lighting conditions.
The Digitilt DataMate II is the second generation of the DataMate. It maintains the same convenient form factor, but features updated electronics that provide significantly faster operation. It can store 160 installation headers and up to 320 surveys (32000 depths with 4 readings for each depth) and communicates with the PC via a USB port.
Overview of Operation
The Digitilt DataMate holds a list of inclinometer installations in memory. To begin a survey, the operator selects an installation from the list. The DataMate then displays the starting depth for the survey. The operator positions the inclinometer probe accordingly and checks the display. The display shows the depth in meters or feet, the A-axis reading, and the B-axis reading. When both readings are stable and ready to record, the DataMate displays a graphic ready signal.
The operator presses the hand-switch to record the readings (the hand switch allows the operator to keep both hands on the control cable). The DataMate beeps and displays the next depth. The operator raises the probe to this depth, and again, watches for the ready signal and records the reading. The operator repeats these steps until the survey is done.
Validating Data
The DataMate provides checksums and checksum statistics to help the operator validate the data set before leaving the site. Questionable readings can be verified and corrected by repositioning the inclinometer probe and re-recording the reading.
Retrieving Data
To transfer data from the DataMate to a PC, the operator runs the DataMate Manager program (DMM), which retrieves the data and stores it in a database for quick access. The DMM program also imports data files from previous Slope Indicator formats and also from G-TILT.
Processing Data
While the DataMate can calculate deviation and displacement for the top or bottom of the installation, more comprehensive processing must be performed on a computer.
DigiPro for Windows is a program designed specifically for this purpose. DigiPro dramatically reduces the time required to process data, eliminates repetitive work, and generates high resolution graphs.
Click to download datasheet | Manual for Readout | Manual for DMM Software
